One man operation for the bleeding of all types of hydraulic cylinders. Supplied with relevant tubes and adaptors.

● Fill bottle with brake fluid.

● Do not fill bottle over 14oz(400ml).

● Select proper cap size and secure plastic hose with nut. (Do not over tight )

● Screw in cap into master cylinder reservoir.

● Connect other end into bottle stem marker “Fluid”.

● Connect air hose into bottle stem marked “air”.

● Insert nozzle into tire valve, and lock in position.

● Check to make sure fluid is flowing through hose and for leaks.

● Adjust as necessary. Insert hose with blue cap into wheel cylinder.

● Loosen wheel cylinder. Loosen wheel cylinder bleeder nut.

● Position bottle to be visible from driver side.

● Pump brake pedal to start flow until fluid level in bottle is near empty. (Do not allow fluid to go below 2OZ (50ml).

● Discharge fluid into a container for disposal.